| No | Description | Qty | |
| 1 | DIGITAL DIAGNOST C90 VR PRO | 1 | |
| Temperature Operation | : | +18 °C to +30 °C | |
| Rel. humidity Operation | : | 30 % to 75 % | |
| Air pressure | : | 700 hPa to 1.060 hPa | |
| 2 | CEILING SUSPENSION | 1 | |
| Four-part aluminium telescopic column with spring counter balanced holder for X-ray tube assembly; adaptable to | |||
| Column Type | : | individual room heights | |
| Ceiling height at source image distance 110 cm (44″) | : | ± 2.84 m to 3.21 m (9′ 3.8″ to 10′ 6.3″) | |
| Movements | |||
| Longitudinal travel with Comfort Position | : | ± 3.26 m (10′ 8.3″) | |
| Transverse travel – short | : | ± 1.49 m (4′ 11″) | |
| Transverse travel – long | : | ± 3.21 m (10′ 6.4″) | |
| Vertical travel | : | ± 1.65 m (5′ 5.2″) | |
| Tube assembly rotation around vertical axis | : | 360° (±180°) with lock position every 45° | |
| Tube assembly rotation around horizontal axis | : | 230° (± 115°) Servo supported movement, stop-lock positions at 0° and ±90° | |
| Rail system | |||
| Hardware | : | Ceiling rail system made of anodized aluminium for long service life | |
| Length of rails | : | ± 4.30 m (14′ 1.3″) | |
| Collimator | |||
| Type | : | Motorized automatic collimation or Manual overrule possible, with LED light field indicator | |
| Angle of rotation | : | ±45° | |
| Added filters to choose | : | Yes | |
| 3 | 12″ TOUCH SCREEN ELEVA TUBE HEAD | 1 | |
| displayed on the screen | |||
| Patient data | : | Yes | |
| Preview images | : | Yes | |
| Grid status | : | Yes | |
| Collimation field size | : | Yes | |
| Angulation | : | Yes | |
| Generator settings | : | Yes | |
| 4 | X-RAY GENERATION | 1 | |
| Generator | : | 65 kW | |
| Mains voltage | : | 380 V/400 V; 50 Hz, 3-phase and 480V; 60 Hz, 3-phase | |
| Max. mains resistance | : | ≤0.2 Ω at 380 V and ≤0.3 Ω at 400/480 V | |
| Max. mains current at 400 V or 380 V | : | 134 A or 150 A | |
| Max. tube voltage | : | 150 kV | |
| Max. tube current (at 80 kV) | : | 800 mA | |
| mAs product without AEC | : | 0.4 to 850 mAs | |
| mAs product with AEC | : | 0.5 to 600 mAs | |
| Compatible with VarioFocus | : | Yes | |
| Safety, Tube overload protection | : | Yes | |
| 5 | X-RAY TUBE | 1 | |
| Type | : | High power X-ray tube (SRO 33100) | |
| Two focal spots | : | 0.6 and 1.2 | |
| Max. power with focal spot 0.6 or with focal spot 1.2 | : | 33 kW / 100 kW | |
| Anode angle | : | 13° | |
| Max. tube voltage | : | 150 kV | |
| Anode heat storage capacity | : | 220 kJ (300 kHU) |
| Continuous Input Power for Assembly | : | 250 W up to 3 hours | ||
| Min. anode speed | : | 8,000 to 10,000 revolutions/minute | ||
| Built in filter | : | Yes | ||
| Compatible with VarioFocus | : | Yes | ||
| Double tube overload protection | : | Yes | ||
| Philips VarioFocus is a unique generator technology that provides outstanding image resolution by simultaneously | ||||
| 6 | VARIOFOCUS | : | using both the small and large tube filaments. | 1 |
| Outstanding image quality through mixed focus spots adapted to each examination | : | Yes | ||
| Outstanding resolution at the power level required | : | Yes | ||
| Reduced exposure time | : | Yes | ||
| Reduced motion artifacts | : | Yes | ||
| Reduced geometrical blur | : | Yes | ||
| Fully automatic | : | Yes | ||
| Electronic physical protection system with motor shutdown for downward movement; upward movement is possible | ||||
| 7 | EXAMINATION TABLE | : | 1 | |
| at any time | ||||
| Type | : | Height Adjustable Table | ||
| Table base | : | ± 51.5 cm to 91.5 cm (20.3″ to 36″) above floor, motorized adjustment | ||
| Max. patient weight | : | ±375 kg (820 lb) | ||
| Dimensions (l x w) | : | ± 240 cm x 75 cm | ||
| longitudinal travel | : | ±60 cm (±23.6″) | ||
| transverse travel | : | ±18 cm (±7.1″) | ||
| 8 | VERTICAL STAND | 1 | ||
| Wall stand have handles | : | Rotatable Patient stretch grip arranged on the top left or right of the wall stand. | ||
| The Wallstand has tilting range | : | from -20 to + 90 degrees. | ||
| Exchange oscillatin GRID | : | Yes | ||
| Control for wall stand | : | The movements of the wallstand should be accessible via both sides of the wallstand | ||
| Vertical travel | : | From ± 30cm to ± 180cm | ||
| Automatic exposure control (AEC) | : | 5 AEC measuring fields | ||
| Operating | : | 2 user interfaces (left and right) | ||
| Brakes | : All movements are locked when system is switched of | |||
| 9 | WIRELESS DETECTOR | 1 | ||
| Type | : | Wireless, Digital CsI (Cesium Iodide) flat detector | ||
| Housing material and Sensor protection material | : | Carbon fiber | ||
| Detector size | : | 35 cm x 43 cm (14″ x 17″) | ||
| Active area | : | 34.5 cm x 42.5 cm (approx. 13.6″ x 16.7″) | ||
| Image matrix size | : | 2,156 x 2,653 pixels | ||
| Image resolution | : | Up to 3.125 Lp/mm | ||
| Energy range (kVp) | : | 40 – 150 | ||
| A/D Conversion (bits) | : | 16 bits | ||
| Max. patient weight | : | 100 kg (220 lb) on 4 cm disk for weight bearing examinations, 300 kg (662 lb) for distributed load. | ||
| Dust/water protection | : | Yes | ||
| 10 | UNIQUE 2 | : UNIQUE 2 is the intuitive user interface provides an excellent opportunity to tailor the image to suit your needs. | 1 | |
| image parameters can be easily adapted for each anatomy type, depending on the preferred focus. | ||||
| Increased image contrast | : | Yes | ||
| Enhanced details | : | Yes | ||
| Reduced noise and artifacts | : | Yes | ||
| Optimal contrast harmonization with enhanced details, while remains natural | : | Yes | ||
| The automatic image stitching software is a dedicated orthopedic feature to automatically acquire long-length and | ||||
| 11 | AUTOMATIC IMAGE STITCHING | |||
| : long-spine images | 1 | |||
| Ability to do stitching procedures with vertical stand and also on the table | : Yes | |||
| Easy for the technologist to use by simply defining the collimation on the patient | : | Yes | ||
| System automatically acquires the number of images needed based on the defined collimation | : | Yes | ||
| Automatic X-ray tube and detector movements during acquisition | : | Yes | ||
| Software automatically stitches acquired images into one composite image | : | Yes | ||
| Patient stand for streamlined patient positioning | : | Yes | ||
| Single-focus X-ray tube rotation to reduce image distortion | : | Yes | ||
| Dedicated orthopedic measurements included | : Yes | |||
| 12 | ELEVA WORKSPOT | : | 1 | |
| Eleva Workspot compute | : | Eleva Workspot easily with the modern 2 Megapixel touch screen monitor | ||
| Operating system | : | Windows 10 | ||
| Processor | : | Intel® CoreTM i5 Processor | ||
| Hard disc | : | 240 GB SSD | ||
| RAM storage capacity | : | 16 GB | ||
| CD/DVD drive | : | CD reader/writer | ||
| Keyboard with mouse and function buttons | : | Yes | ||
| Display | : | 21.3″ high quality LCD color touch screen | ||
| 13 | DICOM | 1 | ||
| Dose Reporting in DICOM Structured Report format | : | Yes | ||
| DICOM WLM (Work List Management) and Classic RIS | : | Yes | ||
| DICOM MPPS (Modality Performed Procedure Step) | : | Yes | ||
| DICOM Print | : | Yes | ||
| DICOM Image Export incl. Storage Commit | : | Yes | ||
| DICOM media on CD-R and DVD-R | : | Yes | ||
| Analyze operator-rejected images and reasons for rejection with this powerful image statistic tool. Clinical QC also | ||||
| 14 | CLINICAL QC TOOLS | : | serves to monitor and analyze general parameters. | 1 |
| Easy and convenient monitoring of departmental quality standards | : | Yes | ||
| Dose documentation per image and examination | : | Yes | ||
| Presets of reasons for image rejection | : | Yes | ||
| Define time period statistic | : | Yes | ||
| Statistic presentation as bar or pie chart at Eleva Workspot | : Yes | |||
| ACESSORIES | ||||
| 15 | 2nd WS (i7, 16GB DDR-2, 2TB, 27″ QHD) or Similar | : | Yes | 1 |
| 16 | Ceiling Construction | : | Yes | 1 |
| 17 | Panel | : | Yes | 1 |
| 18 | Dry Printer | : | Yes | 1 |
| 19 | UPS Console 3kVA | : | Yes | 1 |
| 20 | Apron | : | Yes | 1 |
| 21 | WARRANTY (year) | : | Yes | 3 |
