DATA SPESIFIKASI | ||
BRAND/ MANUFACTURER | PHILIPS | |
FACTORY OF ORIGIN | NETHERLANDS | |
Intended Use | ||
The Philips IntelliSite Pathology Solution (PIPS) is an automated digital slide creation, viewing, and management system. The PIPS is intended for in | ||
vitro diagnostic use as an aid to the pathologist to review and interpret digital images of surgical pathology slides prepared from formalin-fixed paraffin | ||
embedded (FFPE) tissue. The PIPS is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens. | ||
The PIPS comprises the Image Management System (IMS) and the Pathology Scanner SG60/SG300. The PIPS is for creation and viewing of digital | ||
images of scanned glass slides that would otherwise be appropriate for manual visualization by conventional light microscopy. It is the responsibility of | ||
a qualified pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images obtained using PIPS. | ||
Technical specifications | ||
01 | PIPS Pathology Scanner SG60 (1x) | Yes |
The SG60 is designed to for medium to large laboratories that are running a lean workflow | ||
where small batches of slides are being continuously processed and made available for | ||
scanning. Offering high image quality, full automation and same first time right rate as the | ||
SG300, the SG60 enables high, clinical representative, throughput through it’s scan speed, slide | ||
handling and tissue shape detection to non-rectangular optimization of regions of interest | ||
(ROI). This results in short turnaround times and a very efficient total cost of ownership per | ||
slide (TCO/slide). The total scan time of a slide (including handling and pre scan with a 15×15 |
mm benchmark scan area) at a 40x resolution equivalent is ≤ 62 seconds. This translates in real |
practice, to a throughput time of 30 slides per hour. |
Furthermore, with its tissue shape detection, the scanner adapts the scan region |
to the shape of the tissue. This results in reduced over-scanning resulting in |
higher throughput. The automated calibration check per slide, ensures that every |
slide is scanned by a calibrated system and calibration is only triggered when |
truly necessary. The Pathology Scanner digitizes slides fully automatically with a |
99.5 % first pass rate*, providing a workflow that is robust and reliable. |
The SG scanner series also offer remote monitoring of the scanner status, |
allowing operators to monitor the scanner status from a remote PC. |
The Pathology Scanner’s remote service capability, provides faster service |
and support responses that result in shorter down-times, and faster roll out of |
software updates and reduced service costs. |
Slide capacity: 60 |
Scanning method: TDI line scanning |
Focus method: Autofocus |
Output format: iSyntax Philips proprietary file format with either RAW or iSyntax compression |
Slide rack: Winlab LS-20/ Winlab LSM-20, Sakura 4768 20-slide basket (max. number of slides |
20) |
Operating temperature: 10 to 35°C |
Dimensions (LxWxH in mm) doors closed: 680x800x675 |
Scan time (excluding handling and prescan) per slide: SG60 ≤ 43 seconds at 40x equivalent |
(15x15mm scan area) |
Total scan time (including handling and pre-scan) per slide: SG60 ≤ 62 seconds at 40x |
equivalent (15x15mm scan area) |
Average percentage of tissue detected and scanned: ≥ 99.5% |
Power supply: 100-240 V AC, 50/60 Hz, 700 Watt |
Magnification objective: NA of 0.75 plan Apo |
Pixel size/ resolution: 0.25 μm/ pixel |
Compliance to standards: EN IEC 61010-1:2010 /A1:2016, EN IEC 61010-2-101:2018, EN IEC |
61326-1:2013 FCC Part 15, The IEC 61326-2-6 (IVD), IEC 61326-1:2012 IEC 61326-2-6:2012 |
Barcode support: |
1D code type: Code 39 with mod 43 checksum (ISO/IEC 16388:2007) |
Code 128 (ISO/IEC 15417:2007) |
2D code type: Data Matrix ECC 200 – Code 39, Code 128 (ISO/IEC16022:2006) Recommended barcode type for all glass slides. Relative humidity (no condensation): Between 50% at 40 °C and 80% at 31 °C Weight (kg): 142 SG connectivity ports: Ethernet cable for 10GB (required CAT 6 Cable) / and 1GB/s network cable with RJ45 connector (preferable CAT 6) |
|||
02 | Scanner Table (1x) | Yes | |
The Scanner table is designed for our scanner and providing a stable platform for the scanner. | |||
03 | Image Management System (IMS) License (1x) | Yes | |
The Image Management System (IMS) is a case viewing & management software ‘designed for | |||
pathologists with pathologists’ to get pathologist through cases as fast as possible. The IMS is | |||
part of the Philips IntelliSite Pathology Solution. It provides easy access to information and | |||
resources, thereby enabling better-informed decisions. | |||
The IMS is pathologist’s gateway to review and analyze digitized images. Comprehensive and | |||
flexible workflow tools for routine diagnosis give pathologist an advantage over traditional | |||
methods of case organization. | |||
The IMS offers pathologists the tools to manage their digital pathology workload, connecting | |||
them with colleagues anywhere in the world for instant consults, teaching, and knowledge | |||
sharing | |||
• | Real-time collaboration tools that include remote desktop control, rapid notification, and | ||
instant chat | |||
• | Quick manipulate images for review, assessment, collaboration, and reporting | ||
• | Speed pathologists’ workflow by tagging, setting, and assigning cases via a comprehensive | ||
user worklist | |||
Collaboration | |||
• | Single unified case list over multiple locations | ||
• | Simple and secure case sharing with a single-click invite | ||
• | Interactive collaboration with measurement/annotation. Review cases quickly using fast | ||
slide-to-slide transitions, rapid zoom, and clickless panning | |||
• | Send a link to pathologist’s colleagues – Let them assess the case at their convenience with | ||
single click access to a shared session directly from the image viewer |
Workflow management Organize, access, review, manage, and present pathologist’s cases with ease. Role-based, user- specific case lists along with related patient data and notes. • Image alignment automatically aligns multiple serial tissue sections for synchronized panning and zooming • Tissue detection automatically suggests bookmarked sections for single click navigation Smart Navigation via a combination of intuitive workflow oriented shortcut keys and novel clickless panning for comfortable navigation of images |
|||
04 | LIS Integration | Yes | |
• | Automatic registration of case and slide orders | ||
• | Slides organized per case | ||
• | Bidirection and Unidirectional integration have dependency on the dataset that is | ||
transferred in the messaging to display information in the IMS viewer. | |||
• | Barcode integration has a direct dependency on the barcode content in order to parse the | ||
data into IMS viewer | |||
• | Automatic update and merge of case and patient information in IMS | ||
• | Automatic assign pathologist name in IMS | ||
• | Stain information per slide: | ||
– Stain name | |||
– Part ID | |||
– Block ID | |||
– Slide sequence ID | |||
• | Automatic tagging | ||
• | Slide order cancellation notification | ||
• | Automatic set of case priority in IMS | ||
• | Automatic status update in IMS | ||
• | Deletion notification | ||
• | Import Thumbnails in LIS | ||
• | Import Snapshots in LIS | ||
• | Viewing of IMS in context |
05 | Project Management & Implementation (per project) | Yes | ||
• | Project Management | |||
• | Installation | |||
• | Super User Training | |||
• | System Integration Testing and User Acceptance Testing | |||
• | Go Live Support | |||
• | 3 years warranty hardware and software support | |||
06 | Server + Storage Hardware with min 14TB (1x) | Yes | ||
Entry level platform for running IMS and connecting max 1 UFS scanner | ||||
Includes, | ||||
1x Server | ||||
• | Storage minimum 480GB local SSD storage 14TB capacity | |||
• | Processor minimum 8 Core | |||
• | Memory minimum 32GB | |||
1x Client Workstation | ||||
• | Minimum Core i.5 | |||
• | Minimum 16 GB RAM | |||
• | Storage minimum 256GB | |||
• | Windows 10 |